Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset encrypt-card sa ● 233
Command Reference
reset encrypt-card sa
Purpose Use the reset encrypt-card sa command to clear the SAs on the encryption
card.
Syntax reset encrypt-card sa [ slot-id ]
Parameters slot-id
Slot ID for the encryption card, whose range depends
on the slot number on the router. It is in 3-dimentional
format, for example,
x/y/z, where x stands for slot
ID on the router, y and z are fixed to 0 for the
encryption card.
Example Clear the SAs on the encryption card on the slot 5/0/0.
<Router> reset encrypt-card sa 5/0/0
View This command can be used in the following views:
■ User view
Description You may need to clear the SA database information stored on the encryption card, to
output only the required information during debugging.
Related Commands ■ display encrypt-card sa
■ ipsec card-proposal