Command Reference Guide

228 ● radius trap 3Com Router 5000 Family and Router 6000 Family
Command Reference
radius trap
Purpose Use the radius trap command to enable the RADIUS server to send traps when it
goes down.
Use the undo radius trap command to disable the RADIUS server to send traps
when it goes down.
Syntax radius trap { authentication-server-down | accounting-server-down }
undo radius trap { authentication-server-down | accounting-server-down
}
Parameters authentication-server-down
The state of the RADIUS authentication server changes
to down.
accounting-server-down
The state of the RADIUS accounting server changes to
down.
Default By default, the RADIUS server does not send traps when it goes down.
Example Enable the RADIUS authentication server to send traps when it goes down.
[3Com] radius trap authentication-server-down
View This command can be used in the following views:
■ System view