Command Reference Guide

226 ● radius scheme 3Com Router 5000 Family and Router 6000 Family
Command Reference
radius scheme
Purpose Use the radius scheme command to configure a RADIUS scheme and enter its
view.
Use the undo radius scheme command to delete the specified RADIUS scheme.
Syntax radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
Parameters radius-scheme-name
RADIUS scheme name, a character string not
exceeding 32 characters and excluding “/”, “:”, “*”,
“?”, “<” and “>”.
Default By default, the RADIUS scheme named system exists in the system, with all attributes
being the defaults. You cannot delete this scheme.
Example Create a RADIUS scheme named “3Com” and enter its view.
[3Com] radius scheme 3Com
[3Com-radius-3Com]
View This command can be used in the following views:
■ System view
Description The undo radius scheme command can be used to delete any RADIUS scheme
except for the default one. Note that a RADIUS scheme currently being used by any
online users cannot be removed.
RADIUS protocol is configured scheme by scheme. Every RADIUS scheme must at
least specify IP address and UDP port number of RADIUS
authentication/authorization/accounting server and the parameters necessary for the
RADIUS client (a router) to interact with the servers. You must first create a RADIUS
scheme and enter its view before you can perform RADIUS protocol configurations.
A RADIUS scheme can be referenced by several ISP domains at the same time.
Related Commands ■ display radius
■ display radius statistics
■ retry
■ retry realtime-accounting
■ retry stop-accounting