Command Reference Guide

3Com Router 5000 Family and Router 6000 Family primary accounting ● 219
Command Reference
primary accounting
Purpose Use the primary accounting command to configure IP address and port number
of the primary RADIUS accounting server.
Use the undo primary accounting command to restore the default IP address
and port number of the primary RADIUS accounting server.
Syntax primary accounting ip-address [ port-number ]
undo primary accounting
Parameters ip-address
IP address in dotted decimal format. By default, IP
address of the primary accounting server is 0.0.0.0.
port-number
UDP port number of the primary accounting server.
Valid values are 1 to 65535.
If no value is specified, the default is 1813.
Example Set the IP address of the primary accounting server in the RADIUS scheme “3Com” to
10.110.1.2 and use the UDP port 1813 to provide the RADIUS accounting service.
[3Com-radius-3Com] primary accounting 10.110.1.2 1813
View This command can be used in the following views:
■ RADIUS view
Description After creating a RADIUS scheme, you are supposed to configure IP address and UDP
port of each RADIUS server (primary/secondary authentication/authorization or
accounting server). The configuration of RADIUS servers is at your discretion except
that there must be at least one authentication/authorization server and one
accounting server. Besides, ensure that the RADIUS service port settings on the router
are consistent with the port settings on the RADIUS servers.
Related Commands ■ radius scheme
■ state