Command Reference Guide

218 ● primary accounting 3Com Router 5000 Family and Router 6000 Family
Command Reference
primary accounting
Purpose Use the primary accounting command to configure a primary TACACS
accounting server.
Use the undo primary accounting command to delete the configured primary
TACACS accounting server.
Syntax primary accounting ip-address [ port ]
undo primary accounting
Parameters ip-address
IP address of the server, a valid unicast address in
dotted decimal format.
port
Port number of the server. Valid values are 1 to 65535.
If no value is specifed, the default is 49.
Default By default, IP address of TACACS accounting server is all zeros.
Example Configure a primary accounting server.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary accouting 10.163.155.12 49
View This command can be used in the following views:
■ HWTACACS view
Description You are not allowed to assign the same IP address to both primary and secondary
accounting servers.
You can configure only one primary accounting server in a HWTACACS scheme. If
you repeatedly use this command, the latest configuration replaces the previous one.
You can remove an accounting server only when it is not being used by any active TCP
connections, and the removal impacts only packets forwarded afterwards.