Command Reference Guide

3Com Router 5000 Family and Router 6000 Family portal update-resource-id ● 215
Command Reference
portal update-resource-id
Purpose Use the portal update-resource-id command to configure the
update-resource ID.
Use the undo portal update-resource-id command to delete the
update-resource ID.
Syntax portal update-resource-id number
undo portal update-resource-id
Parameters number
Update-resource ID.
Default By default, the update-resource ID is not configured.
Example Set the update-resource ID to 1.
[3Com] portal update-resource-id 1
Delete the update-resource ID.
[3Com] undo portal resource-id
View This command can be used in the following views:
■ System view
Description The update-resource ID is corresponding to the isolation ACL configured on the
security policy server for the router.
The security policy server issues the isolation ACL when an endpoint user using
portal+ client passes identity authentication of AAA. If this isolation ACL is the same
as the update-resource ID, the user can access update resources. If this isolation ACL
is not the same as the update-resource ID, the router assigns the update-resource ID
to the user. By using this update-resource ID, the user can access update resources.
To access resources other than update resources, the user must pass the security
authentication.