Command Reference Guide

214 ● portal update-resource 3Com Router 5000 Family and Router 6000 Family
Command Reference
portal update-resource
Purpose Use the portal update-resource command to add an IP address to update
resources.
Use the undo portal update-resource command to remove one or all IP
addresses from update resources.
Syntax portal update-resource ip ip-address [ mask mask ]
undo portal update-resource { ip ip-address [ mask mask ] | all }
Parameters ip-address
IP address of update-resource.
mask
Dotted decimal subnet mask or mask length of the IP
address of update resource.
all
All update resources.
Default By default, no update resources are configured.
Example Add 192.168.0.201 to update resources.
[3Com] portal update-resource ip 192.168.0.201
Remove 192.168.0.201 from update resources.
[3Com] undo portal update-resource ip 192.168.0.201
View This command can be used in the following views:
■ System view
Description EAD uses two authentication phases, identity authentication of AAA and security
authentication, to control resources accessible to an endpoint user using the portal+
client as follows:
■ When the user passes identity authentication, it can access update resources, that
is, the resources in the isolation zone.
■ When the user passes the subsequent security authentication, it can access all
available resources.