Command Reference Guide

3Com Router 5000 Family and Router 6000 Family portal service-type ● 213
Command Reference
portal service-type
Purpose Use the portal service-type command to set the portal authentication mode.
Use the undo portal service-type command to restore the default portal
authentication mode.
Syntax portal service-type { normal | plus }
undo portal service-type
Parameters normal
Sets the portal authentication mode to normal (or
portal).
plus
Sets the portal authentication mode to portal+.
Default After you enable portal on an interface, normal portal authentication mode applies by
default.
Example Set the portal authentication mode to portal+.
[3Com] portal service-type plus
Set the portal authentication mode to normal.
[3Com] undo portal service-type
View This command can be used in the following views:
■ System view
Description Portal+ is an enhancement to portal; it supports endpoint admission defense in
addition to the functions provided by portal.