Command Reference Guide

3Com Router 5000 Family and Router 6000 Family portal server ● 211
Command Reference
portal server
Purpose Use the portal server command to configure a portal server or modify the
configuration of a portal server.
Use the undo portal server command to delete a specified portal server or
restore the default settings for a specified portal server
Syntax portal server server-name { ip ip-address | key key-string | port port |
url url-string } *
undo portal server server-name [ key | port | url ]
Parameters server-name
Name of the portal server, consisting of a string from 1
to 32 characters long.
ip-address
IP address of the portal server, which cannot be
0.0.0.0, or any loopback address, multicast address, or
broadcast address.
key-string
Shared key for communications between the portal
server and the router, consisting of a string from 1 to
16 characters long. (By default, it is 3Com. )
port
Port from which the router sends packets to the portal
server. Valid values are 1 to 65,534.
If no value is specified, the default is 50,100.
url-string
URL for HTTP redirection. By default, it is a string
starting with http:// and consisting of the value of the
ip-address argument. For example, if the value of the
ip-address argument is 10.110.100.100, then the
default URL is http://10.110.100.100. When entering
the string, you do not need to put it between double
quotation marks.
Example Configure a portal server named 3Com with an IP address of 10.10.100.100, a
communication key of 163, a port of 50101, and an HTTP redirection URL of
http://www.3Com.com.
[3Com] portal server 3Com ip 10.10.100.100 key 163 port 50101 url
http://www.3Com.com
View This command can be used in the following views:
■ System view
Description . All users can access a portal server without limitation.