Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
2191219221932194219521962197219821992200
3Com Router 5000 Family and Router 6000 Family portal all-resource-id ● 203
Command Reference
portal all-resource-id
Purpose Use the portal all-resource-id command to configure the all-resource ID.
Use the undo portal all-resource-id command to delete the all-resource
ID.
Syntax portal all-resource-id number
undo portal all-resource-id
Parameters number
All-resource ID.
Default By default, no all-resource ID is configured.
Example Set the all-resource ID to 2.
[3Com] portal all-resource-id 2
Delete the all-resource ID.
[3Com] undo portal all-resource-id
View This command can be used in the following views:
■ System view
Description The all-resource ID is corresponding to the security ACL configured on the security
policy server for the router.
The security policy server issues the security ACL when an endpoint user using portal+
client passes security authentication. This security ACL must be the same as the
all-resource ID. With the all-resource ID, the user can access network resources other
than update resources.