Command Reference Guide

3Com Router 5000 Family and Router 6000 Family pki request-certificate ● 195
Command Reference
pki request-certificate
Purpose Use the pki request-certificate command to deliver certificate request
through SCEP to CA for the generated RSA key pair. If SCEP fails to go through
normal communication, you can print the local certificate request in base64 format
using the optional parameter PKCS#10, copy it, and send one to CA in an outband
mode.
Syntax pki request-certificate domain domain-name [ password ] [ pkcs10 [
filename filename ] ]
Parameters domain-name
Contains CA or RA related information. It is configured
by using the pki domain command.
password
Optionally involved in certificate revocation. It is a
string consisting of 1 to 31 characters.
pkcs10
Displays the BASE64-encoded PKCS#10 certificate
request. You can use the information to request a
certificate by phone, disk, or email.
filename
Name of the file for saving the PKCS#10 certificate
request.
Example Specify to manually apply for a certificate and display the PKCS#10 certificate request
information.
[3ComCA] pki request-certificate domain 1 pkcs10
View This command can be used in the following views:
■ System view
Description This operation is not saved within the configuration.
Related Command pki domain