Command Reference Guide

3Com Router 5000 Family and Router 6000 Family nas-ip ● 181
Command Reference
nas-ip
Purpose Use the nas-ip command to have all the HWTACACS packets sent by the NAS (the
router) carry the same source address.
Use the undo nas-ip command to delete the setting.
Syntax nas-ip ip-address
undo nas-ip
Parameters ip-address
IP address in dotted decimal format.
Default By default, the source IP address of a HWTACACS packet sent by the NAS is the IP
address of the output port.
Example Set the source IP address carried in the HWTACACS packets that are sent by the NAS
to 10.1.1.1.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] nas-ip
10.1.1.1
View This command can be used in the following views:
■ HWTACACS view
Description Specifying a source address for the HWTACACS packets to be transmitted can avoid
the situation where the packets sent back by the TACACS server cannot be received
as the result of a physical interface failure. The address of a loopback interface is
usually used as the source address.
Related Command display hwatacs