Command Reference Guide

3Com Router 5000 Family and Router 6000 Family local user ● 177
Command Reference
local user
Purpose Use the local-user command to add a local user and enter the local user view.
Use the undo local-user command to remove the specified local user.
Syntax local-user user-name
undo local-user { user-name | all }
Parameters user-name
Specifies a local username with a character string not
exceeding 80 characters, excluding forward slashes (/),
colons (:), asterisks (*), question marks (?), less-than
signs (<), and greater-than signs (>). The @ sign can be
used only once in one username. The username
without domain name (the part before @, namely the
user ID) cannot exceed 55 characters.
user-name is
case-insensitive, so UserA and usera are the same.
all
All the users.
Default By default, no local user is configured.
Example Add a local user named 3Com1.
[3Com] local-user 3Com1
[3Com-luser-3Com1]
View This command can be used in the following views:
■ System view
Related Command display local-user