Command Reference Guide

174 ● ftp-server source-ip 3Com Router 5000 Family and Router 6000 Family
Command Reference
ftp-server source-ip
Purpose Use the ftp-server source-ip command to specify a source IP address for the
packets sent by the FTP server. This IP address must be a local IP address.
Use the undo ftp-server source-ip command to delete the source IP address
specified for the FTP server. After that, the source IP address of a packet sent by the
FTP server is the IP address of the interface where the packet is sent out.
Syntax ftp-server source-ip ip-address
undo ftp-server source-ip
Parameters ip-address
Source IP address.
Default By default, the source IP address in each packet sent by the FTP server is the IP address
of the interface where the packet is sent out.
Example Use 192.168.0.1 as the source IP address in the packets sent by the FTP server.
[Router] ftp-server source-ip 192.168.0.1
View This command can be used in the following views:
■ System view
Description You may specify a source IP address for the packets sent by the FTP server with the
ftp-server source-interface command or with the ftp-server
source-ip command. If both commands are configured, the one configured later
overrides.