Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
2161216221632164216521662167216821692170
174 ● local-address 3Com Router 5000 Family and Router 6000 Family
Command Reference
local-address
Purpose Use the local-address command to configure the IP address of the local GW in
IKE negotiation.
Use the undo local-address command to delete the IP address of the local GW.
Syntax local-address ip-address
undo local-address
Parameters ip-address
IP address of the local GW in IKE negotiation.
Example Set the IP address of the local GW to 1.1.1.1.
[Router-ike-peer-xhy] local-address 1.1.1.1
View This command can be used in the following views:
■ IKE-Peer view
Description Normally, you do not need to configure the local-address command, unless you
want to specify a special address for the local GW.