Command Reference Guide

3Com Router 5000 Family and Router 6000 Family local ● 173
Command Reference
local
Purpose Use the local command to configure the subnet type in IKE negotiation.
Use the undo local command to restore the default subnet type. You can use this
command to enable interoperability between the router and a Netscreen device.
Syntax local { multi-subnet | single-subnet }
undo local
Parameters multi-subnet
Sets the subnet type to multiple.
single-subnet
Sets the subnet type to single.
Default The default is single-subnet.
Example Set the subnet type in IKE negotiation to multiple.
[Router-ike-peer-xhy] local multi-subnet
View This command can be used in the following views:
■ IKE-Peer view