Command Reference Guide
172 ● level 3Com Router 5000 Family and Router 6000 Family
Command Reference
level
Purpose Use the level command to configure user priority level.
Use the undo level command to restore the default user priority level.
Syntax level level
undo level
Parameters level
Specifies user priority level. Valid values are any integer
between 0 and 3.
If no value is specified, the default priority level is 0.
Example Set the priority level of the user to 3.
[3Com-luser-3Com1] level 3
View This command can be used in the following views:
■ Local User view
Description If the configured authentication mode is none authentication or password
authentication, the command level that a user can access after login depends on the
priority of user interface. In the case of authentication requiring both username and
password, however, the accessible command level depends on user priority level.
Related Command local user