Command Reference Guide

160 ● interval-time 3Com Router 5000 Family and Router 6000 Family
Command Reference
interval-time
Purpose Use the interval-time command to configure the interval for triggering DPD
query.
Use the undo interval-time command to restore the default.
Syntax interval-time seconds
undo interval-time
Parameters seconds
Interval for triggering DPD queries. Valid values are 1
to 300 seconds.
If no value is specified, the default is 10 seconds.
Example Set interval-time to 20 seconds.
[3Com-ike-dpd-aaa] interval-time 20
Reset interval-time to 10 seconds.
[3Com-ike-dpd-aaa]undo interval-time
View This command can be used in the following views:
■ DPD Structure view