Command Reference Guide

158 ● ike sa nat-keepalive-timer interval 3Com Router 5000 Family and Router 6000 Family
Command Reference
ike sa nat-keepalive-timer interval
Purpose Use the ike sa nat-keepalive-timer interval command to configure the
NAT keepalive interval for IKE peers.
Use the undo ike sa nat-keepalive-timer interval command to
disable NAT keepalive for IKE peers.
Syntax ike sa nat-keepalive-timer interval seconds
undo ike sa nat-keepalive-timer interval
Parameters seconds
Specifies the NAT keepalive interval for IKE peers (in
seconds). Valid values are 5 to 300.
Default By default, NAT keepalive of IKE is disabled.
Example Set the NAT keepalive interval to 30 seconds for IKE peers.
[3Com] ike sa nat-keepalive-timer interval 30
View This command can be used in the following views:
■ System view
Description The NAT keepalive interval must be less than the translation timeout of NAT.