Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ike peer (System view) ● 153
Command Reference
ike peer (System view)
Purpose Use the ike peer command to configure an IKE peer and access IKE-peer view.
Use the undo ike peer command to delete an IKE peer.
Syntax ike peer peer-name
undo ike peer peer-name
Parameters peer-name
IKE peer name, which is comprised of a string of up to
15 characters.
Example Configure an IKE peer “new_peer” and access its view.
[Router] ike peer new_peer
[3Com-ike-peer-new_peer]
View This command can be used in the following views:
■ System view