Command Reference Guide

148 ● ldap-server 3Com Router 5000 Family and Router 6000 Family
Command Reference
ldap-server
Purpose Use the ldap-server ip command to configure the LDAP server IP address and
the port.
Use the undo ldap-server ip command to cancel the related configuration.
Syntax ldap-server ip ip-address [ port port-num ] [ version version-number ]
undo ldap-server ip
Parameters ip-address
IP address of LDAP server.
port-num
Port number of the LDAP server. Valid values are 1 to
65535.
If no value is specified, the default is 389.
version-number
LDAP version number, alternatively 2 or 3.
If no value is specified, the default is 2.
Default By default, no LDAP server IP address or port is configured.
Example Specify the LDAP server address
[RouterCA-pki-domain-1] ldap-server ip 169.254.0 30
View This command can be used in the following views:
■ PKI Domain view