Command Reference Guide

3Com Router 5000 Family and Router 6000 Family id-type ● 147
Command Reference
id-type
Purpose Use the id-type command to select the type of ID used in IKE negotiation.
Use the undo id-type command to restore the default setting. By default, IP
address is the ID used in IKE negotiation.
Syntax id-type { ip | name }
undo id-type
Parameters ip
Selects IP address as the ID used in IKE negotiation.
name
Selects name as the ID used in IKE negotiation.
Example Set name as the ID used in IKE negotiation.
[Router] ike peer new_peer
[Router-ike-peer-new_peer] id-type name
View This command can be used in the following views:
■ IKE-Peer view
Description In main mode, you can only use IP address to perform IKE negotiation and to create
an SA.
In aggressive mode, you can use both IP address and name to perform Ike negotiation
and to create an SA.
Related Command ike local-name