Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ftp-operation ● 171
Command Reference
ftp-operation
Purpose Use the ftp-operation command to configure the FTP operation done by the
system.
Syntax ftp-operation { get | put }
Parameters get
Gets a file from an FTP server.
If no other FTP operation is specified, get is the default.
put
Sends a file to an FTP server.
Example Set the FTP operation to get.
[Router-administrator-ftp] ftp-operation get
View This command can be used in the following views:
■ HWPing Test Group view
Description To FTP a file from a server, use the ftp-operation get command. To FTP a file to
a server, use the ftp-operation put command.
This command applies only to FTP test.
Related Commands ■ username
■ password