Command Reference Guide

170 ● ftp 3Com Router 5000 Family and Router 6000 Family
Command Reference
ftp
Purpose Use the ftp command to set up control connection to the remote FTP server and
enter FTP client view.
Syntax ftp [host [ port ] ] [ source-interface interface-type interface-number
| source-ip ip-address ]
Parameters host
IP address or hostname of the remote FTP server.
port
Port number of the remote FTP server.
interface-type
interface-number
Specifies source interface type and number of the FTP
client.Source address of the FTP client.
ip-address
Specifies source address of the FTP client
Example Connect to the remote FTP server with the IP address of 1.1.1.1.
<3Com> ftp 1.1.1.1
View This command can be used in the following views:
■ User view