Command Reference Guide

3Com Router 5000 Family and Router 6000 Family dpd ● 125
Command Reference
dpd
Purpose Use the dpd command to reference a DPD structure.
Use the undo dpd command to remove the referenced DPD structure.
Syntax dpd dpd-name
undo dpd
Parameters dpd-name
DPD structure name.
Example Configure IKE peer 1 to reference DPD structure aaa.
[3Com-ike-peer-peer1] dpd aaa
Remove the DPD structure referenced by IKE peer 1.
[3Com-ike-peer-peer1] undo dpd
View This command can be used in the following views:
■ IKE Peer view
Description The DPD structure referenced by an IKE peer must be one that has existed.
Each time a DPD structure is referenced, its reference counter increments by one;
each time this structure is removed, its reference counter decrements by one.
Related Command ike dpd