Command Reference Guide

3Com Router 5000 Family and Router 6000 Family frequency ● 169
Command Reference
frequency
Purpose Use the frequency command to configure an automatic test interval.
Use the undo frequency command to restore the default value.
Syntax frequency interval
undo frequency
Parameters interval
Automatic test interval (in seconds). Valid values are 0
to 65535.
If no value is specified, the default is 0, meaning no
automatic test. For a jitter voice test, it defaults to 60.
Example Set the automatic test interval to 10 seconds.
[Router-administrator-icmp] frequency 10
View This command can be used in the following views:
■ HWPing Test Group view
Description The system automatically tests at intervals specified by this command, where the
argument interval is greater than 0.
Related Command count