Command Reference Guide

3Com Router 5000 Family and Router 6000 Family domain ● 123
Command Reference
domain
Purpose Use the domain command to configure an ISP domain or enter the view of an
existing ISP domain.
Use the undo domain command to cancel a specified ISP domain.
Syntax domain [ isp-name | default { disable | enable isp-name } ]
undo domain isp-name
Parameters isp-name
Specifies an ISP domain name. It comprises up to 24
characters, excluding forward slashes (/), colons (:),
asterisks (*), question marks (?), less-than signs (<),
and greater-than signs (>).
default
Configures the default ISP domain. The system-default
ISP domain is named system. When you perform the
display current-configuration command, you can see
the default ISP domain name if it is manually
configured as opposed to the system-defaut one.
disable
Disables the configured default ISP domain.
Unqualified usernames, which are not suffixed with a
domain name, in this case will be rejected.
enable
Enables the configured default ISP domain. It is to be
suffixed to received unqualified usernames before
being sent to AAA servers.
Default By default, the system uses the domain named system. You are not allowed to delete
this domain, but you can view its settings by executing the
display domain
command.
Example Create a new ISP domain, 3Com163.net, and enters its view.
[3Com] domain 3Com163.net
New Domain added.
[3Com-isp-3Com163.net]
View This command can be used in the following views:
■ System view
Description An ISP domain is a group of users belonging to the same ISP. Generally, for a
username in the userid@isp-name format, [e-mail] for example,
the isp-name (”3Com163.net” in the example) following the “@” is the ISP domain
name. When an AAA server controls user access, for an ISP user whose username is in