Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display time-range ● 119
Command Reference
display time-range
Purpose Use the display time-range command to view the configuration and the status
of time range. For the active time range at present, it displays "active" and for the
inactive time range, it displays "inactive".
Syntax display time-range { all | time-name }
Parameters time-name
Name of the time range.
all
Displays all the configured time ranges.
Example Display all time ranges.
[3Com] display time-range all
Display the time range named trname.
[3Com] display time-range trname
Current time is 02:49:36 2/15/2003 Saturday
Time-range : trname ( Inactive )
14:00 to 16:00 off-day from 00:00 12/1/2002 to 00:00 12/1/2003
View This command can be used in the following views:
■ Any view
Description Since there is a time deviation when the system updates acl status, which is about 1
minute, but
display time-range will display the information of time range at
the current time exactly. Thus, the following case may happen: use the command
display time-range to find that a time range is activated but the acl that should
be active in the time range is inactive. This case is normal.