Command Reference Guide

118 ● display stop-accounting-buffer 3Com Router 5000 Family and Router 6000 Family
Command Reference
display stop-accounting-buffer
Purpose Use the display stop-accounting-buffer command to view information on
the stop-accounting requests buffered in the router.
Syntax display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
Parameters hwtacacs-scheme
hwtacacs-scheme-name
Displays information on buffered stop-accounting
requests related to the HWTACACS scheme specified
by
hwtacacs-scheme-name, a character string not
exceeding 32 characters and excluding “/”, “:”, “*”,
“?”, “<” and “>”.
Example Display information on the buffered stop-accounting requests related to the
HWTACACS scheme “3Com".
<3Com> display stop-accounting-buffer hwtacacs-scheme 3Com
-------------------------------------------------------------
NO. SendTime IP Address Template
1 10 172.31.1.27 3Com
-------------------------------------------------------------
Whole accounting stop packet to resend:1
View This command can be used in the following views:
■ Any view
Description The router buffers and retransmits each stop-accounting request packet for which no
response is received from the RADIUS server. You may set the total number of
transmissions by using the
retry stop-accounting command.
Related Commands ■ reset stop-accounting-buffer
■ stop-accounting-buffer enable
■ retry stop-accounting
Table 1 Description on the fields of the display stop-accounting-buffer command
Field Description
NO Sequence number of the stop-accounting request
SendTime Count of stop-accounting request transmission attempts
IP Address IP address of the TACACS server