Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display radius statistics ● 115
Command Reference
Timer_Err :0 Alloc_Mem_Err :0
State Mismatch :0 Other_Error :0
No-response-acct-stop packet =0
Discarded No-response-acct-stop packet for buffer overflow =0
Table 1 Description on the fields of the display radius statistics command
Field Description
state statistic(total=1048)
DEAD=1047 AuthProc=0
AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=1
AcctStop=0 OnLine=1 Stop=0
StateErr=0State statistics for RADIUS
Received and Sent packets statistic:
Sent PKT total :38 Received PKT
total:2
Resend Times Resend total
1 12
2 12
Total 24
Statistics about transmitted/received packets, including:
Count of transmitted packets
Count of received packets
Count of retransmissions and retransmitted packets
RADIUS received packets statistic:
Code= 2, Num=1, Err=0
Code= 3, Num=0, Err=0
Code= 5, Num=1, Err=0
Code=11, Num=0, Err=0
Statistics about received packets of RADIUS, including
packet type code, count of received packets and errors of
each type
The following are meanings of code values:
2: authentication response
3: authentication rejected
5: accounting response
11: Access-Challenge (EAP authentication) packet
Running statistic: Operating statistics for RADIUS, including count of
reeived/sent messages and errors