Command Reference Guide

114 ● display radius statistics 3Com Router 5000 Family and Router 6000 Family
Command Reference
display radius statistics
Purpose Use the display radius statistics command to view the statistics
information on RADIUS packets. The displayed packet information can help you
troubleshoot RADIUS faults.
Syntax display radius statistics
Parameters None
Example Display the statistics information on RADIUS packets.
<3Com> display radius statistics
state statistic(total=1048):
DEAD=1047 AuthProc=0 AuthSucc=0
AcctStart=0 RLTSend=0 RLTWait=1
AcctStop=0 OnLine=1 Stop=0
StateErr=0
Received and Sent packets statistic:
Sent PKT total :38 Received PKT total:2
Resend Times Resend total
1 12
2 12
Total 24
RADIUS received packets statistic:
Code= 2,Num=1 ,Err=0
Code= 3,Num=0 ,Err=0
Code= 5,Num=1 ,Err=0
Code=11,Num=0 ,Err=0
Running statistic:
RADIUS received messages statistic:
Normal auth request , Num=13 , Err=0 , Succ=13
EAP auth request , Num=0 , Err=0 , Succ=0
Account request , Num=1 , Err=0 , Succ=1
Account off request , Num=0 , Err=0 , Succ=0
PKT auth timeout , Num=36 , Err=12 , Succ=24
PKT acct_timeout , Num=0 , Err=0 , Succ=0
Realtime Account timer , Num=0 , Err=0 , Succ=0
PKT response , Num=2 , Err=0 , Succ=2
EAP reauth_request , Num=0 , Err=0 , Succ=0
PORTAL access , Num=0 , Err=0 , Succ=0
Update ack , Num=0 , Err=0 , Succ=0
PORTAL access ack , Num=0 , Err=0 , Succ=0
Session ctrl pkt , Num=0 , Err=0 , Succ=0
RADIUS sent messages statistic:
Auth accept , Num=0
Auth reject , Num=0
EAP auth replying , Num=0
Account success , Num=0
Account failure , Num=0
Cut req , Num=0
RecError_MSG_sum:0 SndMSG_Fail_sum :0