Command Reference Guide

112 ● display radius 3Com Router 5000 Family and Router 6000 Family
Command Reference
display radius
Purpose Use the display radius command to view the configuration information about
the specified or all RADIUS schemes or to view statistics about RADIUS.
Syntax display radius [ radius-scheme-name | statistics ]
Parameters radius-scheme-name
Specifies a RADIUS scheme with a string not exceeding
32 characters and excluding forward slashes (/), colons
(:), asterisks (*), question marks (?), less-than signs (<),
and greater-than signs (>). If no scheme is specified, all
RADIUS schemes are displayed.
statistics
Displays statistics.
Default By default, the configuration information about all RADIUS schemes is displayed.
Example Display the configurations of all RADIUS schemes.
<3Com> display radius
------------------------------------------------------------------
SchemeName =system Index=1 Type=3Com
Primary Auth IP =127.0.0.1 Port=1645 State=active
Primary Acct IP =127.0.0.1 Port=1646 State=active
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= 3Com
Acct Server Encryption Key= 3Com
Accounting method = required
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 1 Information about RADIUS server configuration
Field Description
SchemeName RADIUS scheme name
Index Index number of the RADIUS scheme
Type Type of the RADIUS scheme
Primary Auth IP/ Port/ State IP address/access port number/current state of the primary
authentication server
Primary Acct IP/ Port/ State IP address/access port number/current state of the primary
accounting server