Command Reference Guide

98 ● display ipsec sa 3Com Router 5000 Family and Router 6000 Family
Command Reference
Description The command with brief parameter shows brief information about all the SAs, whose
display format is the brief format (refer to the following example). Brief information
includes source address, destination address, SPI, protocol, and algorithm. A display
beginning with "E" in the algorithm stands for the encryption algorithm, and a
display beginning with "A" stands for the authentication algorithm. The brief
command can be used to display all the SAs already set up quickly.
The commands with remote and policy parameters both display the detailed
information about the SA. The display mode: part of the information about the ipsec
policy is shown first and then the detailed information of the SA in this ipsec policy.
The command with duration parameter shows the global sa duration, including
"time-based" and "traffic-based" sa duration. Refer to the examples for this
command.
Information of all the SAs will be shown when no parameter is specified.
Related Commands ■ reset ipsec sa
■ ipsec sa global-duration
■ display ipsec sa
■ display ipsec policy