Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ipsec policy-template ● 93
Command Reference
display ipsec policy-template
Purpose Use the display ipsec policy-template command to view information
about the ipsec policy template.
Syntax display ipsec policy-template [ brief | name template-name [ seq-number
] ]
Parameters brief
Displays brief information about all the ipsec policy
templates.
name
Displays information of the ipsec policy template with
the name
template-name and sequence number
seq-number.
template-name
Name of an ipsec policy template.
seq-number
Sequence number of an ipsec policy template. If no
parameter is specified, then the detail information
about all the ipsec policy templates will be displayed. If
name
template-name is specified but seq-number
is not, the information of the specified IPSec policy
template group is displayed.
Example View brief information about all the ipsec policy templates.
[3Com] display ipsec policy-template brief
Policy-template-Name acl Remote-Address
------------------------------------------------------
test-tplt300 2200
View This command can be used in the following views:
■ Any view
Description Parameter brief is for showing brief information about all the ipsec policy templates,
whose display format is the brief format (see the following example). It can display
information on all the ipsec policy templates quickly. Brief information includes:
template name and sequence number, access control list, and remote address.
Any of the sub-commands can be used to display detail information of the IPSec
policy template.
Table 1 Brief information of IPSec policy template
Item Description
Policy-template-Name name, sequence number of an ipsec policy template
acl access control list used by an ipsec policy template
Remote Address remote IP address