Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display interface encrypt ● 89
Command Reference
display interface encrypt
Purpose Use the display interface encrypt command to view information about
interfaces on the specified or all encryption cards.
Syntax display interface encrypt [ slot-id ]
Parameters slot-id
Slot ID for the encryption card, whose range depends
on the slot number on the router. It is in 3-dimentional
format, for example,
x/y/z, where x stands for slot ID
on the router, y and z are fixed to 0 for the encryption
card.
Example Display the port information on the encryption card at slot 5/0/0.
[Router] display interface Encrypt 5/0/0
Description : Encrypt5/0/0 Interface
Protocol Status: READY
Driver Status : READY
Total Statistics
Packets sent to card : 10
Packets received from card : 9
Bytes sent to card : 1216
Bytes received from card : 584
Dropped packets : 0
Statistics during last 5 seconds
Packets sent to card : 0
Packets received from card : 0
Bytes sent to card : 0
Bytes received from card : 0
Dropped packets : 0
View This command can be used in the following views:
■ Any view
Description With this command, you can view the status of the encryption card, total
countnumber of packets transmitted or received on it, maximum countnumber of
packets dropped per second, information during the last five seconds.
Related Command interface encrypt