Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ike proposal ● 85
Command Reference
display ike proposal
Purpose Use the display ike proposal command to view the parameters configured for
each IKE proposal.
Syntax display ike proposal
Parameters None
Example Display the IKE proposal information after two IKE proposals are configured.
[3Com] display ike proposal
priority authentication authentication encryption Diffie-Hellman
duration
method algorithm algorithm group
(seconds)
--------------------------------------------------------------------
10 PRE_SHARED SHA DES_CBC MODP_1024 5000
11 PRE_SHARED MD5 DES_CBC MODP_768 50000
default PRE_SHARED SHA DES_CBC MODP_768 86400
View This command can be used in the following views:
■ Any view
Description This command shows IKE proposals in the sequence of the priority.
Related Commands: ■ authentication-method
■ ike proposal
■ encryption-algorithm
■ authentication-algorithm
■ dh
■ sa duration
Tabl e 1 Description on the fields of the display ike proposal command
Field Description
Priority Priority of the IKE proposal, an integer in the
range 1 to 100, with a higher number
indicating a lower priority
authentication algorithm Authentication algorithm in the IKE proposal
authentication method Authentication mode in the IKE proposal
encryption algorithm Encryption algorithm in the IKE proposal
Diffie-Hellman group Diffie-Hellman group identifier
duration ISAKMP SA lifetime in the IKE proposal