Command Reference Guide

84 ● display ike peer 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ike peer
Purpose Use the display ike peer command to view the configuration about the
specified or all IKE peers.
Syntax display ike peer [ peer-name ]
Parameters peer-name
Name of an IKE peer.
Example Display the configuration about all IKE peers.
[3Com-ike-peer-good] display ike peer
---------------------------
IKE Peer: good
exchange mode: main on phase 1
pre-shared-key:
peer id type: ip
peer ip address: 0.0.0.0 ~ 255.255.255.255
peer name:
nat traversal: disable
View This command can be used in the following views:
■ Any view