Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display hwatacs ● 81
Command Reference
display hwatacs
Purpose Use the display hwtacacs command to view configuration information of
specified or all HWTACACS schemes.
Syntax display hwtacacs [ hwtacacs-scheme-name [ statistics ] ]
Parameters hwtacacs-scheme-name
HWTACACS scheme name, consisting of a string of 1
to 32 case-insensitive characters, excluding forward
slashes (/), colons (:), asterisks (*), question marks (?),
less-than signs (<), and greater-than signs (>). If no
HWTACACS scheme is specified, the system displays
the configuration of all HWTACACS schemes.
statistics
Displays complete statistics about the HWTACACS
server.
Default By default, configuration information of all HWTACACS schemes is displayed.
Example View configuration information of HWTACACS scheme gy.
<3Com> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name : gy
Primary-authentication-server : 172.31.1.11:49
Primary-authorization-server : 172.31.1.11:49
Primary-accounting-server : 172.31.1.11:49
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server : 0.0.0.0:0
Secondary-accounting-server : 0.0.0.0:0
Current-authentication-server : 172.31.1.11:49
Current-authorization-server : 172.31.1.11:49
Current-accounting-server : 172.31.1.11:49
Source-IP-address : 0.0.0.0
key authentication : 790131
key authorization : 790131
key accounting : 790131
Quiet-interval(min) : 5
Response-timeout-Interval(sec) : 5
Domain-included : No
Traffic-unit : B
Packet traffic-unit : one-packet
Table 1 Description on the fields of the display radius statistics command
Field Description
HWTACACS-server template
name
HWTACACS scheme
Primary-authentication-server IP address and port number of the primary authentication server
Primary-authentication-server IP address and port number of the primary authentication server
Primary-authentication-server IP address and port number of the primary authentication server