Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display encrypt-card syslog ● 79
Command Reference
display encrypt-card syslog
Purpose Use the display encrypt-card syslog command to view the current system
log on the encryption cards.
Syntax display encrypt-card syslog [ slot-id ]
Parameters slot-id
Slot ID for the encryption card, whose range depends
on the number of slots on the router. If no slot is
specified, information on all encryption cards is
displayed. Slot numbers are represented by
x/y/z,
where x is the slot number, and y and z are zero for
encryption cards.
Example Display the system log on the encryption card at slot 5/0/0.
[Router] display encrypt-card syslog 5/0/0
Date: 2004-03-27, Time: 11:45 Encrypt5/0/0 : receive time config cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive link tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive link tdb cmd.
View This command can be used in the following views:
■ Any view
Description If the slot ID you type in is greater than the available slot number on the router, the
error information “Invalid encrypt-card slot-id” shall be prompted.