Command Reference Guide

78 ● display encrypt-card statistics 3Com Router 5000 Family and Router 6000 Family
Command Reference
display encrypt-card statistics
Purpose Use the display encrypt-card statistics command to view statistics on
the specified or all encryption cards.
Syntax display encrypt-card statistics [ slot-id ]
Parameters slot-id
Slot ID for the encryption card, whose range depends
on the number of slots on the router. It is in
3-dimentional format, for example,
x/y/z, where x
stands for slot ID on the router, y and z are fixed to 0
for the encryption card.
Example Display the statistics on the encryption card at slot 5/0/0.
[Router] display encrypt-card statistics 5/0/0
Encrypt5/0/0 security packets statistics :
input/output security packets: 8/4
input/output security bytes: 1472/604
dropped security packet detail:
no enough memory: 0
can’t find SA: 0
queue is full: 0
authentication is failed: 0
wrong length: 0
replay packet: 0
too long packet: 0
wrong SA: 0
invalid proposal: 0
invalid protocol: 0
buffer error: 0
wrap error: 0
crypto error: 0
pad error: 0
View This command can be used in the following views:
■ Any view
Description The statistics includes the processing information of ESP/AH packets on the
encryption card. More details are displayed in the following example.
If the slot ID you type in is greater than the available slot number on the router, the
error information “Invalid encrypt-card slot-id” will be prompted.
Related Command reset encrypt-card statistics