Command Reference Guide

76display encrypt-card sa 3Com Router 5000 Family and Router 6000 Family
Command Reference
display encrypt-card sa
Purpose Use the display encrypt-card sa command to view SA information.
Syntax display encrypt-card sa [ slot-id ]
Parameters slot-id
Slot ID for the encryption card, whose range depends
on the slot number on the router. It is in 3-dimentional
format, for example,
x/y/z, where x stands for slot
ID on the router, y and z are fixed to 0 for the
encryption card.
Example Display all SA information on the encryption card at slot 5/0/0.
[Router] display encrypt-card sa 5/0/0
AH SAs
proposal: ESP-AUTH-SHA1HMAC96
local address: 20.0.0.2
remote address: 20.0.0.1
sa remaining key duration (bytes/sec): 1887435992/2401
spi: 1081108020 (0x40706634)
Uses Encrypt5/0
ESP SAs
proposal: ESP-ENCRYPT-3DES
proposal: ESP-AUTH-SHA1HMAC96
local address: 20.0.0.2
remote address: 20.0.0.1
sa remaining key duration (bytes/sec): 1887436136/2401
spi: 891512401 (0x35236651)
Uses Encrypt5/0/0
ESP SAs
proposal: ESP-ENCRYPT-3DES
proposal: ESP-AUTH-SHA1HMAC96
local address: 20.0.0.1
remote address: 20.0.0.2
sa remaining key duration (bytes/sec): 1887436532/2401
spi: 3024247997 (0xb4425cbd)
Uses Encrypt5/0/0
AH SAs
proposal: ESP-AUTH-SHA1HMAC96
local address: 20.0.0.1
remote address: 20.0.0.2
sa remaining key duration (bytes/sec): 1887436464/2401
spi: 2937733563 (0xaf1a41bb)
Uses Encrypt5/0/0
View This command can be used in the following views:
Any view