Command Reference Guide

164 ● filename 3Com Router 5000 Family and Router 6000 Family
Command Reference
filename
Purpose Use the filename command to configure the name of the file to be gotten from or
put onto an FTP server.
Use the undo filename command to cancel the configuration of the file name.
Syntax filename file-name
undo filename
Parameters file-name
Name of the file to be gotten from or put onto an FTP
server.
Default By default, no file name is configured.
Example Specify the file to be gotten from or put onto an FTP server by specifying its name
“config.txt".
[Router-administrator-ftp] filename config.txt
View This command can be used in the following views:
■ HWPing Test Group view
Description This command applies only to FTP test.
Related Commands ■ username
■ password
■ ftp-operation