Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display domain ● 73
Command Reference
display domain
Purpose Use the display domain command to view the configuration of a specified ISP
domain or display the summary information of all ISP domains.
Syntax display domain [ isp-name ]
Parameters isp-name
Specifies the ISP domain name, with a character string
not exceeding 24 characters. The specified ISP domain
must be an existing one.
Default By default, the summary of all ISP domains is displayed.
Example Display configuration information for the test domain.
[Router] display domain test
The contents of Domain test:
State = Active
Current Authentication : RADIUS Scheme = test
Current Authorization: TACACS Scheme = hwt
Current Accounting : RADIUS Scheme = rad
Accounting Optional = Disable
Access-limit = Disable
Domain User Template:
View This command can be used in the following views:
■ Any view
Description This command is used to output the configuration of a specified ISP domain or display
the summary information of all ISP domains. If an ISP domain is specified, the
configuration information will be displayed exactly the same, concerning the content
Table 1 Description on the fields of the display domain command
Field Description
The contents of Domain
test
Configuration information of the test domain
State State of the domain user: active or block
Current Authentication Authentication scheme for the domain
Current Authorization Authorization scheme for the domain
Current Accounting Accounting scheme for the domain
Accounting Optional State of optional accounting: enable or disable
Access-limit State of the restriction on the concurrent connected users
accommodated by the domain user: disable or enable
Domain User Template Domain user template