Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display aspf session ● 69
Command Reference
display aspf session
Purpose Use the display aspf session command to view the information of the ASPF
sessions.
Syntax display aspf session [ verbose ]
Parameters verbose
Displays the detailed information of the sessions.
Example Display information on current ASPF sessions.
[3Com] display aspf session
[Established Sessions]
Session Initiator Responder Application Status
212BA84 169.254.1.121:1427 169.254.1.52:0 ftp-data TCP_DOWN
2B738C4 169.254.1.121:1426 169.254.1.52:21 ftp
FTP_CONXN_UP
Display detailed information of current ASPF sessions.
[3Com] display aspf session verbose
[ Established Sessions ]
[ Session 0xC7E2B4 ]
(192.168.0.1:2125)=>(13.1.0.5:2093) h245-media-control H245_OPEN
SessNum: 229, TransProt: 6,
AppProt: 21
Prev: 0x0, Next: 0x0,
Child: 0xCA9EA4,
Parent: 0x0
SynNode: 0x0, FinNode: 0x0
Interface: Ethernet1/0/0,
Direction: outbound
Bytes/Packets sent (initiator:responder) [1339/15 : 1309/12]
Tcp SeqNum/AckNum [352115193/62885460 : 62885456/352115193]
Timeout 00:02:00(120),
Table 1 Information of current ASPF sessions
Item Description
TransProt: 6 Transport layer protocol is numbered 6, which means that TCP is
used.
AppProt: 21 Application layer protocol uses port 21, which means that the
sessions are FTP sessions
Interface: Ethernet1/0/0
Direction: outbound
ASPF policy is applied in outbound direction of the interface
Ethernet1/0/0
Bytes/Packets sent Bytes/Packets transmitted between the originating and responding
sides of the connection
Timeout 00:02:00(120) Timeout time set for the protocol is 120 seconds