Command Reference Guide

66 ● display aspf all 3Com Router 5000 Family and Router 6000 Family
Command Reference
display aspf all
Purpose Use the display aspf all command to view the information of all ASPF policies
and sessions.
Syntax display aspf all
Parameters None
Example View the information of ASPF policy and session.
[3Com] display aspf all
[ASPF Policy 1]
Session audit trail: disabled
tcp synwait-time: 30 sec
tcp finwait-time: 5 sec
tcp idle-time: 3600 sec
udp idle-time: 30 sec
h323 timeout: 3600
tcp timeout: 33
[Interface Configuration]
Interface: Ethernet0/0/0
Inbound ASPF policy: none
Outbound ASPF policy: 1
View This command can be used in the following views:
■ Any view
Table 1 ASPF configuration information
Item Description
Session audit trail:
disabled
The session logging function is disabled.
tcp syn wait-time TCP connected SYN status timeout value is 30 seconds.
tcp finnwait-time TCP connection FIN status timeout value is 5 seconds.
tcp idle-time Timeout for the idle-time of TCP session is 3600 seconds.
udp idle-time Timeout for the idle-time of UDP session is 30 seconds.
http java-list 1 timeout Detect the HTTP traffic and filter the Java Applets from some
particular sites by using ACL 1. The HTTP timeout time is set to
3000 seconds. “h323 timeout” indicates the timeout time of the
h323 session entry.mayifei
h323 timeout The policy inspects h323 traffic. The timeout time of h323 is 3600
seconds.
tcp timeout The policy inspects tcp traffic. The timeout time of tcp is 33 seconds.
Inbound ASPF policy ASPF policy in the inbound direction of the interface
outbound ASPF policy ASPF policy in the outbound direction of the interface