Command Reference Guide

50 ● debugging local-server 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging local-server
Purpose Use the debugging local-server command to enable debugging for the local
RADIUS authentication server.
Use the undo debugging local-server command to disable debugging for
the local RADIUS authentication server.
Syntax debugging local-server { all | error | event | packet }
undo debugging local-server { all | error | event | packet }
Parameters all
Enables/disables debugging for all items.
error
Enables/disables debugging for errors.
event
Enables/disables debugging for events.
packet
Enables/disables debugging for packets.
Default By default, debugging for the local RADIUS authentication server is not enabled.
Example Enable debugging for the local RADIUS authentication server.
[3Com] debugging local-server all
*0.9045238 3Com LS/8/EVENT-MSG:Message received. MessageType = 1
*0.9045238 3Com LS/8/PACKET:Packet Received,Code = 1
*0.9045239 3Com LS/8/PACKET:Packet Send auth pkt ,Code =
View This command can be used in the following views:
■ User view