Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging ipsec ● 49
Command Reference
debugging ipsec
Purpose Use the debugging ipsec command to turn IPSec debugging on.
Use the undo debugging ipsec command to turn IPSec debugging off.
Syntax debugging ipsec { all | sa | misc | packet [ policy policy-name [
seq-number ] | parameters ip-address protocol spi-number ] }
undo debugging ipsec { all | sa | misc | packet [ policy policy-name [
seq-number ] | parameters ip-address protocol spi-number ] }
Parameters all
Displays all debugging information.
sa
Displays debugging information of SA.
packet
Displays debugging information of IPSec packets.
policy policy-name
Displays debugging information of IPSec policy whose
name is
policy-name.
seq-number
Displays debugging information of IPSec policy whose
sequence number is
seq-number.
parameters
Displays debugging information of a SA whose remote
address is
ip-address, Security protocol is
protocol, and SPI is spi-number.
misc
Displays other debugging information of IPSec.
Default By default, IPSec debugging is off.
Example Enable IPSec SA debugging function.
<3Com> debugging ipsec sa
View This command can be used in the following views:
■ User view