Command Reference Guide

48 ● debugging ike dpd 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging ike dpd
Purpose Use the debugging ike dpd command to enable IKE DPD debugging.
Use the undo debugging ike dpd command to disable IKE DPD debugging.
Syntax debugging ike dpd
undo debugging ike dpd
Parameters None
Example Enable IKE DPD debugging.
<3Com> debugging ike dpd
peer1 RESPONSE(recv dpd request): received a message (seqno:1249119552)
peer1 RESPONSE(send dpd response): send a message (seqno:1249119552)
peer1 REQUEST(send dpd request): send a message (seqno:1249119550)
peer1 REQUEST(recv dpd response): received a message (seqno:1249119550)
View This command can be used in the following views:
■ User view
Description The following table describes the fields of the debugging ike dpd command.
Tabl e 1 Description on the fields of the debugging ike dpd command
Field Description
Peername Name of the IKE peer
type Two options are available:
Response, indicating that the IKE peer is the receiver of a DPD query
Request: indicating that the IKE peer is the sender of a DPD query
action Types of actions:
recv dpd request, meaning a DPD query is received.
send dpd response, meaning a DPD response is sent.
send dpd request, meaning a DPD query is sent.
recv dpd response, meaning a DPD response is received.
seqno Sequence number of a DPD query