Command Reference Guide

3Com Router 5000 Family and Router 6000 Family debugging ike ● 47
Command Reference
debugging ike
Purpose Use the debugging ike command to enable IKE debugging.
Use the undo debugging ike command to disable IKE debugging.
Syntax debugging ike { all | error | exchange | message | misc | transport}
undo debugging ike { all | error | exchange | message | misc |
transport}
Parameters all
All IKE debugging functions.
error
IKE error debugging information.
exchange
IKE exchange mode debugging information.
message
IKE message debugging information.
misc
All the other IKE debugging information.
transport
IKE transport debugging information.
Default By default, IKE debugging is disabled.
Example Enable IKE error debugging.
<3Com> debugging ike error
View This command can be used in the following views:
■ User view