Command Reference Guide

44 ● debugging encrypt-card 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging encrypt-card
Purpose Use the debugging encrypt-card command to enable debugging on the
specified or all encryption cards.
Use the undo debugging encrypt-card command to disable debugging on the
encryption card.
Syntax debugging encrypt-card { all | command | error | misc | packet | sa } [
slot-id ]
undo debugging encrypt-card { all | command | error | misc | packet | sa
}
debugging encrypt-card host { all | command | error | misc | packet | sa
}
undo debugging encrypt-card host { all | command | error | misc | packet
| sa }
Parameters all
Enables all debugging on the encryption card.
command
Enables command debugging on the encryption card.
error
Enables error debugging on the encryption card.
misc
Enables other debugging on the encryption card.
packet
Enables packet debugging on the encryption card.
sa
Enables security association (SA) debugging on the
encryption card.
host
Enables host debugging on the encryption card.
slot-id
Slot ID for the encryption card, whose range depends
on the number of slots on the router. It is in
3-dimentional format, for example,
x/y/z, where x
stands for slot ID, y and z are fixed to 0 for the
encryption card.
Example Enable command debugging on the encryption card at slot 5/0/0.
[Router] debugging encrypt-card command 5/0/0
View This command can be used in the following views:
■ User view